🧠

DB-generated product page · slug hglrc-zeus-f722-mini

flight controllerdraft

HGLRC Zeus F722 Mini

Flight controller seed profile with expanded filter attributes

Rotor Genie fit question

Does it have the pads, UARTs, firmware target, and stack mount your build needs?

RDQ groups FCs by stack size: 20x20, 25x25/whoop, 30x30, wing, and accessories.

Brand

HGLRC

Model

Zeus F722 Mini

Weight

Unknown

Category row

flight_controller

Availability / buy path

affiliate-ready

No merchant URL set yet. This tile is where per-store stock, price, and outbound links will live.

Normalized compatibility fields

These are public filter parameters from the compatibility profile. Missing facts are explicitly labeled Unknown; field confidence stays private for the engine/admin workflow.

MCU

STM32F722

UART count

Betaflight target

ZEUSF722MINI

ESC interface

4in1

Bidirectional DShot

Yes

Build class

5inch

Ecosystem

analog · dji · walksnail · hdzero

Mount patterns

20x20

Connectors

Unknown

Protocols

SBUS · CRSF · ELRS · IBUS · DShot300 · DShot600

Detected filter values

Known values from the same fields that power catalog filters.

Component category

flight_controller

Top-level component slot. Mirrors FPV store mega menus but keeps builder slots first.

Brand / maker

HGLRC

Brand from normalized DB row or manufacturer tags.

Build class

5inch

Practical class like 5 inch, whoop, cinewhoop, long range.

Video / radio ecosystem

analog · dji · walksnail · hdzero

Analog, DJI, Walksnail, HDZero, ELRS, Crossfire, etc.

Stack / FC mount

20x20

20x20, 25.5x25.5/whoop, 30.5x30.5, and stackable VTX formats.

Motor bolt pattern

20x20

Hard blocker field for motor-to-frame fit.

ESC type

4in1

4-in-1, individual, AIO, wing, or stack pairing.

FC MCU

STM32F722

F4/F7/H7/G4/etc. Useful for firmware capability and future-proofing.

Prop diameter

5 in

Frame clearance and motor load sanity check.

Firmware / protocol

SBUS · CRSF · ELRS · IBUS

Betaflight target, AM32/BLHeli/Bluejay, CRSF/SBUS/DShot/MSP, and similar protocol fields.

Row status

draft

Draft/seed/verified/import state for catalog QA.

Normalized specs

{
  "fc_mcu": "STM32F722",
  "price_usd": null,
  "gyro_count": 1,
  "gyro_model": null,
  "uart_total": 5,
  "i2c_present": null,
  "inav_target": null,
  "bec_5v_max_a": null,
  "bec_9v_max_a": null,
  "release_year": null,
  "stock_status": "unknown",
  "wifi_present": null,
  "bec_10v_max_a": null,
  "bec_12v_max_a": null,
  "blackbox_type": null,
  "esc_interface": "4in1",
  "led_pad_count": null,
  "usb_port_type": null,
  "board_weight_g": null,
  "osd_chip_model": "AT7456E",
  "tvs_protection": null,
  "includes_cables": true,
  "adc_inputs_count": null,
  "blackbox_size_mb": null,
  "mount_pattern_mm": [
    "20x20"
  ],
  "barometer_present": null,
  "beginner_friendly": false,
  "betaflight_target": "ZEUSF722MINI",
  "bluetooth_present": null,
  "beeper_pad_present": true,
  "camera_control_pad": null,
  "includes_capacitor": null,
  "ardupilot_supported": null,
  "board_dimensions_mm": null,
  "boot_button_present": true,
  "compat_whoop_builds": false,
  "has_analog_osd_chip": true,
  "has_builtin_elrs_rx": false,
  "input_voltage_max_v": null,
  "input_voltage_min_v": null,
  "motor_outputs_count": 4,
  "compat_dji_o3_direct": true,
  "compat_hdzero_direct": true,
  "esc_signal_protocols": [
    "DShot300",
    "DShot600"
  ],
  "magnetometer_present": false,
  "supported_cell_count": null,
  "control_freak_friendly": true,
  "compat_5_inch_freestyle": true,
  "compat_walksnail_direct": true,
  "video_systems_supported": [
    "analog",
    "dji",
    "walksnail",
    "hdzero"
  ],
  "compat_long_range_7_inch": false,
  "needs_soldering_advanced": true,
  "wireless_config_supported": null,
  "receiver_protocols_supported": [
    "SBUS",
    "CRSF",
    "ELRS",
    "IBUS"
  ],
  "supports_bidirectional_dshot": true
}

Compatibility tags

{
  "ecosystems": [
    "analog",
    "dji",
    "walksnail",
    "hdzero"
  ],
  "rx_protocols": [
    "SBUS",
    "CRSF",
    "ELRS",
    "IBUS"
  ],
  "build_classes": [
    "5inch"
  ],
  "esc_protocols": [
    "DShot300",
    "DShot600"
  ],
  "stack_mounting_mm": [
    "20x20"
  ]
}