DB-generated product page · slug matek-h743-wlite

flight controllerdraft

Matek H743-WLITE

BETAFPV Cetus Pro BL V2.1 Flight Controller

Rotor Genie fit question

Does it have the pads, UARTs, firmware target, and stack mount your build needs?

RDQ groups FCs by stack size: 20x20, 25x25/whoop, 30x30, wing, and accessories.

Brand

Matek

Model

Matek H743-WLITE

Weight

Unknown

Category row

flight_controllers

Availability / buy path

affiliate-ready

No merchant URL set yet. This tile is where per-store stock, price, and outbound links will live.

Normalized compatibility fields

These are public filter parameters from the compatibility profile. Missing facts are explicitly labeled Unknown; field confidence stays private for the engine/admin workflow.

MCU

STM32H743

UART count

Betaflight target

MATEKH743WLITE

ESC interface

4in1

Bidirectional DShot

Yes

Build class

5inch · 7inch

Ecosystem

analog · dji · walksnail · hdzero

Mount patterns

30.5x30.5

Connectors

Unknown

Protocols

SBUS · CRSF · ELRS · IBUS · DShot300 · DShot600

Detected filter values

Known values from the same fields that power catalog filters.

Component category

flight_controller

Top-level component slot. Mirrors FPV store mega menus but keeps builder slots first.

Brand / maker

Matek

Brand from normalized DB row or manufacturer tags.

Build class

5inch · 7inch

Practical class like 5 inch, whoop, cinewhoop, long range.

Video / radio ecosystem

analog · dji · walksnail · hdzero

Analog, DJI, Walksnail, HDZero, ELRS, Crossfire, etc.

Stack / FC mount

30.5x30.5

20x20, 25.5x25.5/whoop, 30.5x30.5, and stackable VTX formats.

Motor bolt pattern

30.5x30.5

Hard blocker field for motor-to-frame fit.

ESC type

4in1

4-in-1, individual, AIO, wing, or stack pairing.

FC MCU

STM32H743

F4/F7/H7/G4/etc. Useful for firmware capability and future-proofing.

Prop diameter

5 in

Frame clearance and motor load sanity check.

Firmware / protocol

SBUS · CRSF · ELRS · IBUS

Betaflight target, AM32/BLHeli/Bluejay, CRSF/SBUS/DShot/MSP, and similar protocol fields.

Row status

draft

Draft/seed/verified/import state for catalog QA.

Normalized specs

{
  "fc_mcu": "STM32H743",
  "price_usd": null,
  "gyro_count": 1,
  "gyro_model": null,
  "uart_total": 8,
  "i2c_present": null,
  "inav_target": null,
  "bec_5v_max_a": null,
  "bec_9v_max_a": null,
  "release_year": null,
  "stock_status": "unknown",
  "wifi_present": null,
  "bec_10v_max_a": null,
  "bec_12v_max_a": null,
  "blackbox_type": null,
  "esc_interface": "4in1",
  "led_pad_count": null,
  "usb_port_type": null,
  "board_weight_g": null,
  "osd_chip_model": "AT7456E",
  "tvs_protection": null,
  "includes_cables": true,
  "adc_inputs_count": null,
  "blackbox_size_mb": null,
  "mount_pattern_mm": [
    "30.5x30.5"
  ],
  "barometer_present": null,
  "beginner_friendly": false,
  "betaflight_target": "MATEKH743WLITE",
  "bluetooth_present": null,
  "beeper_pad_present": true,
  "camera_control_pad": null,
  "includes_capacitor": null,
  "ardupilot_supported": null,
  "board_dimensions_mm": null,
  "boot_button_present": true,
  "compat_whoop_builds": false,
  "has_analog_osd_chip": true,
  "has_builtin_elrs_rx": false,
  "input_voltage_max_v": null,
  "input_voltage_min_v": null,
  "motor_outputs_count": 4,
  "compat_dji_o3_direct": true,
  "compat_hdzero_direct": true,
  "esc_signal_protocols": [
    "DShot300",
    "DShot600"
  ],
  "magnetometer_present": false,
  "supported_cell_count": null,
  "control_freak_friendly": true,
  "compat_5_inch_freestyle": true,
  "compat_walksnail_direct": true,
  "video_systems_supported": [
    "analog",
    "dji",
    "walksnail",
    "hdzero"
  ],
  "compat_long_range_7_inch": true,
  "needs_soldering_advanced": true,
  "wireless_config_supported": null,
  "receiver_protocols_supported": [
    "SBUS",
    "CRSF",
    "ELRS",
    "IBUS"
  ],
  "supports_bidirectional_dshot": true
}

Compatibility tags

{
  "ecosystems": [
    "analog",
    "dji",
    "walksnail",
    "hdzero"
  ],
  "rx_protocols": [
    "SBUS",
    "CRSF",
    "ELRS",
    "IBUS"
  ],
  "build_classes": [
    "5inch",
    "7inch"
  ],
  "esc_protocols": [
    "DShot300",
    "DShot600"
  ],
  "stack_mounting_mm": [
    "30.5x30.5"
  ]
}