SpeedyBee F405 V4 FC
Orqa QuadCore H7 Flight Controller
Does it have the pads, UARTs, firmware target, and stack mount your build needs?
RDQ groups FCs by stack size: 20x20, 25x25/whoop, 30x30, wing, and accessories.
Availability / buy path
affiliate-readyNo merchant URL set yet. This tile is where per-store stock, price, and outbound links will live.
Normalized compatibility fields
These are public filter parameters from the compatibility profile. Missing facts are explicitly labeled Unknown; field confidence stays private for the engine/admin workflow.
Detected filter values
Known values from the same fields that power catalog filters.
Top-level component slot. Mirrors FPV store mega menus but keeps builder slots first.
Brand from normalized DB row or manufacturer tags.
Practical class like 5 inch, whoop, cinewhoop, long range.
Analog, DJI, Walksnail, HDZero, ELRS, Crossfire, etc.
20x20, 25.5x25.5/whoop, 30.5x30.5, and stackable VTX formats.
Hard blocker field for motor-to-frame fit.
4-in-1, individual, AIO, wing, or stack pairing.
F4/F7/H7/G4/etc. Useful for firmware capability and future-proofing.
Frame clearance and motor load sanity check.
Betaflight target, AM32/BLHeli/Bluejay, CRSF/SBUS/DShot/MSP, and similar protocol fields.
Draft/seed/verified/import state for catalog QA.
Normalized specs
{
"fc_mcu": "STM32F405",
"price_usd": null,
"gyro_count": 1,
"gyro_model": null,
"uart_total": 6,
"i2c_present": null,
"inav_target": null,
"bec_5v_max_a": null,
"bec_9v_max_a": null,
"release_year": null,
"stock_status": "unknown",
"wifi_present": null,
"bec_10v_max_a": null,
"bec_12v_max_a": null,
"blackbox_type": null,
"esc_interface": "4in1",
"led_pad_count": null,
"usb_port_type": null,
"board_weight_g": null,
"osd_chip_model": "AT7456E",
"tvs_protection": null,
"includes_cables": true,
"adc_inputs_count": null,
"blackbox_size_mb": null,
"mount_pattern_mm": [
"30.5x30.5"
],
"barometer_present": null,
"beginner_friendly": false,
"betaflight_target": "SPEEDYBEEF405V4",
"bluetooth_present": true,
"beeper_pad_present": true,
"camera_control_pad": null,
"includes_capacitor": null,
"ardupilot_supported": null,
"board_dimensions_mm": null,
"boot_button_present": true,
"compat_whoop_builds": false,
"has_analog_osd_chip": true,
"has_builtin_elrs_rx": false,
"input_voltage_max_v": null,
"input_voltage_min_v": null,
"motor_outputs_count": 4,
"compat_dji_o3_direct": true,
"compat_hdzero_direct": true,
"esc_signal_protocols": [
"DShot300",
"DShot600"
],
"magnetometer_present": false,
"supported_cell_count": null,
"control_freak_friendly": true,
"compat_5_inch_freestyle": true,
"compat_walksnail_direct": true,
"video_systems_supported": [
"analog",
"dji",
"walksnail",
"hdzero"
],
"compat_long_range_7_inch": true,
"needs_soldering_advanced": true,
"wireless_config_supported": true,
"receiver_protocols_supported": [
"SBUS",
"CRSF",
"ELRS",
"IBUS"
],
"supports_bidirectional_dshot": true
}Compatibility tags
{
"ecosystems": [
"analog",
"dji",
"walksnail",
"hdzero"
],
"rx_protocols": [
"SBUS",
"CRSF",
"ELRS",
"IBUS"
],
"build_classes": [
"5inch",
"7inch"
],
"esc_protocols": [
"DShot300",
"DShot600"
],
"stack_mounting_mm": [
"30.5x30.5"
]
}